Overview
Gypsemna’s CH Studs are specially designed for Shaftwall Systems, whereby access is only via one side, such as those commonly found in lift shafts, stairways and garbage shoots. The CH Studs are designed to provide friction-fit contact for 25 mm Gypsemna's Core Board as shaft liner. CH Studs normally space at every 600 mm to suit the width of the Gypsemna's Core Board panel. The Gypsemna’s CH Studs are available in a wide range of lengths and thicknesses which is dependent on the requirement of the build for strength, height, impact resistance and sound insulation.
Specification
Physical Properties
- Coating Z275 Zinc coating / Z180 Zinc coating / Z140 Zinc coating
- Standard compliance ASTM C645 / ASTM A653 / ASTM A645/ ASTM A370
- Material Cold roll-formed from hot-dipped galvanised steel
- Grade G300
- Min yield strength 300mpa
- Min tensile strength 340mpa
- Thickness 0.55 mm, 0.60 mm, 0.70 mm, 0.80 mm, 0.90 mm, 1.0 mm, 1.10 mm, 1.20 mm, 1.30 mm and 1.50 mm
- Flange 35 mm and 38 mm
- Width 64 mm, 100 mm and 150 mm
- Length 3,000 mm to 12,000 mm
Advantages
- For all areas requiring a smoothly finished, monolithic wall plane
- Fire resistant ratings
- Flexibility of configuration
- Dimensionally stable
- Impervious to rot, fungal and insect attack
- Corrosion resistant
- Won’t warp, twist or bow
- Easily worked, few tools required
- Non-combustible
related downloads
-
Technical Data Sheet
Let’s Talk
Got a project?
With an annual capacity of up to 50 million m² and an export network covering the world, we are capable of meeting all your needs.
Gypsemna 2025
Product catalogue
Close