Overview
The suspension Anchor features a body diameter matches the hole diameter, providing maximum shear capacity for the given hole size. Its cold-forged construction ensures superior strength and reliability. The anchor is designed to achieve maximum expansion of the sleeve. This action is further assisted by the application of load - making it ideal for suspension applications. The gripping lugs on the expansion sleeve engage the sides of the hole ensuring full expansion during setting.
Specification
SIZE
- Diameter d = 6.0mm
- Drill hole diameter do = 6.0mm
- Length L = 60mm
TECHNICAL DATA
- Recommended load in tension 1.88KN
- Recommended bending resistance 2.0Nmm
- Concrete grade C20/C25
- Coating Zinc coating (3-5 microns)
INSTALLATION GUIDE
- Drill a 6 mm diameter hole, to the recommended depth, into the concrete soffit. Remove debris using a hand pump, compressed air, or vacuum.
- Insert the anchor into the hole and tap with a hammer until it cannot go further
- Using the claw of a hammer, pull down on the head of the anchor until set.
- Drill hole diameter, do = 6.0mm
- Minimum Drill hole depth, ho = 50mm
- Effective embedment, hef= 45mm
- Minimum edge distance = 50mm
- Minimum concrete thickness = 100mm
NOTE
- Values represent the maximum recommended working load in tension.
- Tension loads are provided for static load conditions only.
- A minimum hole depth of 50mm is required.
- The Suspension anchors only to be used for gravitational tensile applications.
related downloads
-
Technical Data Sheet
Let’s Talk
Got a project?
With an annual capacity of up to 50 million m² and an export network covering the world, we are capable of meeting all your needs.
Gypsemna 2026
Product catalogue
Close